English Instructions on Top – Instrucciones en español abajo
March 2, 2024 – Version 2.1
GSX Profile for SKCL Alfonso Bonilla Aragon International Airport by TEIKOF Studio
Full GSX profile for the MSFS payware scenery SKCL – Alfonso Bonilla Aragon Intl by TEIKOF Studio. Profile for gates was made to resemble reality as much as possible and uses the latest Colombian AIS information from Aerocivil Colombia.
Modeled Gates: Gates A1-A4, B5-B11, C12-C14, D15-D20, R1-R3, Cargo Gates L1 - L2, International General Aviation Stands 1G - 5G
Custom Python Script:
- 2 Files to choose from:
- SKCL_JCPR_ES - 20240302: Relabels gates with Spanish names.
- SKCL_JCPR_EN - 20240302: Relabels gates with English names.
- New Gate Labels:
- Domestic Terminal – Regional Apron (Gates A1-A4)
- Domestic Terminal – Concourse B (Gates B5-B11)
- Domestic Terminal – Concourse C (Gates C12-C14)
- International Terminal – Concourse D (Gates D15-D20)
- Remote Decongestion Stands (Stands R1-R3)
- Cargo Apron (Stands L1-L2)
- International Terminal – General Aviation (Stands 1G-5G)
- Custom Stop position for all gates except for General Aviation (Gates 100-107, and 200). Stop Positions match the scenery's custom stop lines
Features for all gates:
- Marshaller – if applicable, the marshaller has been positioned properly within the scenery. All gates except 100-107, and 200.
- Corrected Stop Positions – Uses a Python script to accurately mark the stop positions so they match the scenery custom stop lines.
- Custom pushback paths per the corresponding pushback spots as defined in the Colombian AIS for SKCL -REFER TO AEROCIVIL COLOMBIA’S AIS FOR CORRECT SPOT USAGE WHEN PUSHING BACK
- Custom vehicle locations for each gate
- Gates A1-A4 have been customized to use the GSX passenger walkers to model passengers boarding/deboarding without the bus and walking to the terminal.
- Gates R1-R3 use the bus to shuttle passengers to and from the terminal.
- Gate D15 – Using the Python Script has a displaced position for Heavy aircraft.
- Pushback and handling are disabled in all General Aviation stands (1G-5G, 100-107, and 200)
Installation:
1. Delete any files in %APPDATA%\Virtuali\GSX\MSFS that start with SKCL
2. Extract the .zip file and move the .ini file to %APPDATA%\Virtuali\GSX\MSFS
3. Move EITHER SKCL-JCPR_EN - 20240302.py OR SKCL-JCPR_ES - 20240302.py python files to %APPDATA%\Virtuali\GSX\MSFS
4. If installed correctly there should be only 2 files starting with SKBO in the %APPDATA%\Virtuali\GSX\MSFS folder: one ending in .ini and another in .py.
IMPORTANT:
1. REMEMBER TO REPOSITION AT THE GATE WITH GSX AT THE START OF THE FLIGHT.
2. THIS PROFILE WAS CREATED WITH GSX VERSION 2.93.
3. THIS PROFILE WAS TESTED AND CREATED WHILE HAVING THE ‘SU12 NAVDATA API’ OPTION IN GSX ACTIVE! IT HAS NOT BEEN TESTED WITHOUT THIS OPTION ACTIVE.
4. ONLY ONE PYTHON FILE (.py) FILES CAN BE IN THE %APPDATA%\Virtuali\GSX\MSFS FOLDER!!!
Troubleshooting in Case Profile doesn’t Load:
Please send me a message if you encounter an error or any other issues. This should work as any other standard GSX profile.
Happy Flights!
JCPR
-------------------------------------------------------------------------------------------------------------
Español:
Marzo 2, 2024 – Versión 2.1
Perfil GSX para SKCL – Alfonso Bonilla Aragón Intl de TEIKOF Studio
Perfil completo de GSX para el escenario pago de MSFS SKCL – Alfonso Bonilla Aragón Intl de TEIKOF Studio. El perfil se creó lo más cercano a la realidad y usando la última información de la base AIS de la Aerocivil Colombia.
Puertas Modeladas: Puertas A1-A4, B5-B11, C12-C14, D15-D20, R1-R3, posiciones de carga L1-L2, y las posiciones de Aviación General del Muelle Internacional 1G-5G.
Código Personalizado de Python:
- 2 archivos para escoger:
- SKCL_JCPR_ES: Cambia los nombres de las posiciones en GSX con nombres en español
- SKCL_JCPR_EN: Cambia los nombres de las posiciones en GSX con nombres en ingles
- Nuevos nombres de puertas en GSX:
- Terminal Nacional - Plataforma Regional (A1-A4)
- Terminal Nacional - Muelle B (B5-B11)
- Terminal Nacional - Muelle C (C12-C14)
- Terminal Internacional - Muelle D (D15-D20)
- Terminal Internacional - Aviación General (1G-5G)
- Terminal de Carga (L1-L2)
- Plataforma Remota de Descongestión (R1-R3)
- Aviación General (100-107, 200)
- Posiciones de parada personalizada para todas las posiciones excepto 100-107 y 200. Las posiciones de parada cuadran perfectamente con las líneas del escenario.
Características para todas las Puertas:
- Paletero (guía de aviones) – Si aplica, se posesiono correctamente en el escenario (todas las posiciones excepto 100-107, y 200)
- Posiciones de parada corregidas
- Puntos (Spots) de retroceso personalizados para cada puerta de acuerdo con el AIS de la Aerocivil Colombia para SKCL – REFIERANSE A LA AIS DE LA AEROCIVIL PARA EL USO CORRECTO DE CADA PUNTO DE RETROSESO
- Posiciones de vehículos personalizados para cada puerta
- Las puertas A1-A4 hacen uso de los pasajeros caminantes de GSX que modelan a los pasajeros abordar/desabordar los aviones caminando desde la terminal hasta el avión sin el uso de buses.
- Las puertas R1-R3 usan buses para llevar a los pasajeros entre la terminal y el avión
- Puerta D15 usa el código de Python para tener posiciones de parada laterales para aviones pesados
- Retroceso y servicios de tierra han sido desactivados en las todas las posiciones de Aviación General tanto internacional como domesticas (Posiciones 1G-5G, 100-107, y 200)
Instalación:
1. Borre todos los archivos en %APPDATA%\Virtuali\GSX\MSFS que empiecen con SKCL
2. Extraiga el archivo ‘.ini’ en %APPDATA%\Virtuali\GSX\MSFS
3. Mueva SKCL-JCPR_EN - 20240302.py O SKCL-JCPR_ES - 20240302.py a %APPDATA%\Virtuali\GSX\MSFS
4. Al final, si se instaló correctamente, debería haber solo DOS (2) archivos en la carpeta que empiecen con SKCL: uno que termine en .ini y otro en .py.
IMPORTANTE:
1. RECUERDE REPOSICIONARSE EN LA POSICION DE PARQUEO CON GSX AL INICIAR UN VUELO DESDE SKCL
2. ESTE PERFIL SE CREO CON LA VERSION 2.93 DE GSX.
3. ¡OPCION DE ‘SU12 NAVDATA API’ ACTIVADA EN GSX! NO SE HA PROBADO SIN ESTA OPCION ACTIVADA.
4. ¡SOLO UN ARCHIVO DE PYTHON (py) PUEDE ESTAR EN EL FOLDER %APPDATA%\Virtuali\GSX\MSFS!
En caso de que el Perfil no Funcione:
Por favor envíe un mensaje si encuentra algún error u otro problema. Esto debería funcionar como cualquier perfil de GSX estándar.
¡Felices vuelos!
JCPR
No la encuentro
7 hours ago
cocolo9
3 months ago
3 months ago
JuanKP
sebas2289
En el dia de hoy 21/01/2024 hora 09:50 PM tengo la ultima actualizacion y volvere a revisar si aun persiste el problema.
Nota: Acabo de corregir y no era un ATR el que estava volando era un CRJ
3 months ago
3 months ago
JuanKP
Thegamerpro0094
4 months ago
4 months ago
JuanKP
MatheoF
4 months ago
4 months ago
JuanKP
mhron