Streamdeck SD+ profile for the FlightFX Vision Jet G2+ (SF50)
Please read the included manual ( VisionJet_SDPlus_manual.pdf ) for further instructions and important informations on how to setup the jet to work properly with the SD+ profile.
ATTENTION:
- You need the AAO / Axis and Oh's software and the AAO plugin for Streamdeck
- Please remove any old version of this streamdeck profile before installing a new version.
- Install the AAO scripts by importing the VisionJet_AAO_Scripts.xml file in the AAO software.
- Install the SD+ Streamdeck profile by double click on the Vision Jet G2+.streamDeckProfile file.
The following functions are coverd in the profile:
"Elec(tronics) & Air" Startup Page for bringing the jet out of cold & dark (Step1) Actions for:
- BAT1 on/off
- BAT2 on/off
- GEN1 on/off
- GEN2 on/off
- Strobe Light on/off
- Landing Light on/off
- GPU Support on/off
- Checklist scroll and check
"Start Up" Page 2 Actions for:
- Starter switch to Run/off
- Engine start (off not working at the moment)
- ECS Disable on/off
- GPU on/off
- Oxygen Supply on/off
- Fresh Air/Bleed on/off
- Probe Heat on/off
- Checklist scroll/check
- N1% info
- N2% info
- BARO setting and STD switch
"Lights/Deice" Page Actions for:
- Strobe Light on/off
- Landing light on/off
- ice/wing light on/off
- Engine deice on/off
- Wing/Stab deice on/off
- Windshield deice on/off
- Checklist scroll/check
- BARO set/STD Switch
"COM & MAP" Page Actions for:
- Transponder status
- Vatsim Unicom 122.800 preselect for COM1 standby
- direct link to Autopilot page
- COM1 active/standby frequency info and xfer
- COM1 standby Mhz change via rotary
- COM1 Khz change via rotary
- Map scrolling up/down/left/right via Multi-Level-Rotary
- Map Zoom/Panning select/activation via rotary
"Landing final" page for the last miles to the runway Actions for:
- APR mode button on/off
- Gear status/up/down
- Landing light on/off
- AP speed increase in +1 and +5 kts steps
- AP speed decrease in -1 and -5 kts steps
- COM1 active/standby info & xfer (I usually have tower on active and grnd on stby at final)
- checklist check
- COM1 standby Mhz change via rotary
- COM1 standy Khz change via rotary
- Map scrolling up/down/left/right via Multi-Rotary
- Map Zoom in/out & "move/swipe" mode activation for scrolling feature - (the zoom is nice to get to the "airport" level for taxiing or to zoom and scroll on the navigraph charts)
"Autopilot" Page Actions for:
- AP on/off
- Autothrust on/off
- Autothrust FMS/MAN mode
- FLC mode on/off
- HDG mode on/off
- NAV mode on/off
- VNV mode on/off
- ALT hold on/off
- HDG change rotary with sync feature
- Speed change rotary
- Altimeter change rotary with sync feature
- VS rate change up/down with activation feature rotary
"VAMS/Exterior/Other" Page Actions for:
- Preflight/Exterior Actions Folder
- Automatic noise reduction on/off
- V.A.M.S. tablet open/closed
"Preflight/Exterior" Page for:
- Cabin door open/close
- Covers on/off
- Luggage door open/close
- V.A.M.S. tablet open/closed
- Headphones on/off
- Chocks set/removed
- Luggage Setting Page
"Lugagge Setting" Page:
- Control the loaded luggage for family vacation, snowboard trip, golf trip and empty compartment
This is my first SD+ profile and I still have some things to implement and I also have to refine the graphics. But I thought you might want to give it a try. Please report bugs and ideas and positiv feedback via comments. Thank you and happy flying.
2 months ago
myloder
Could the "Back" button (lower left) be made into the APR button... but have a small arrow top left of key display... with LONG PRESS for "Back" ?
OR: Vert Speed display has room on right for 'Press Window' command to Activate APPR ?
Don't know if can be done ... ?
Also... I like the Landing Page in principle, but maybe find room for the Man/FMS speed control toggle.
Speed up and down is only useful if you've switched to Manual control on Approach.
👍
3 months ago
3 months ago
isiFlying
Gabe777
More improvements.
3 months ago
Gabe777
4 months ago
4 months ago
isiFlying
zbootsum
Changing FMS and Manual speed to the Speed Dial button press, would free up a button spot for APR.
Would need room in the window above for FMS or MAN to green up.
Cheers 👍
4 months ago
4 months ago
isiFlying
Gabe777