ページを読み込み中...

Applications

Exclusive

4.65 STARS

6.8K+ Downloads

AIGround

AIGround is a MSFS simconnect utility designed to improve AI taxi characteristics. AIGround: (1) holds the AI stationary on the tarmac after pushback for a more realistic amount of time, (2) perform control surface checks as they begin their taxi out, (3) increase or...


Flightsim.toについて

AIGround is a MSFS simconnect utility designed to improve AI taxi characteristics at the airport the user’s aircraft is located at.  

AIGround holds the AI stationary on the tarmac after pushback for a more realistic amount of time before the AI begins its taxi out.  

The AI will also perform control surface checks as they begin their taxi out (if control surface animations are supported by the AI model in use).

AIGround can also optionally increase or decrease the AI’s taxi speed.  

AIGround also prevents the AI from spinning while stationary at the threshold (a bug of the native AI control program).

The user can also optionally reduce or extend the AI landing and takeoff ground rolls.  

AIGround enforces better spacing between AI and the user’s aircraft when the user is performing a taxi-out or taxi-in.  AIGround does this by commanding the AI to temporarily stop in situations that the normal MSFS AI control program would miss. This spacing is also enforced against airport ground vehicles.  However, in situations where the user might want stopped AI to continue its taxi (e.g., giving way an intersection) (e.g., moving a backed up line of AI), the user can flash the landing lights or strobes (on certain aircraft flashing the strobes is much easier) off-on-off as a signal to the AI to continue the taxi.  Note however that the native MSFS AI taxi control program may continue to stop AI independently of AIGround.

The user can also ZAP (remove) AI traffic (both aircraft and ground vehicles) that has become stationary (stuck) and is blocking the user’s path by turning the landing lights on, then flashing the strobes off-on-off.  

AIGround does not require a configuration file to run, however the configuration file AIGround.ini is included, which contains several parameters that the user may change to suit personal preferences.

AIGround is designed to compliment the default MSFS AI program and thus is fully compatible with it.  Thus, AIGround is compatible with any AI-related program that places AI mostly under control of the default AI program (SU11), such as MSFS live traffic, MSFS off-line traffic and external AI injection programs that mostly rely upon the default AI program after injection.   

AIGround operates externally via simconnect and thus makes NO changes to the MSFS sim. 

See the included readme.txt and readme.pdf for additional details.

AIGround AIFlow SimConnect Traffic
Details
互換性
Sim Update 11
カテゴリー
Applications
リリース日
October 26, 2022
最終更新日
1 day(s) ago — 2.0.6

Version

2.0.6

ファイルサイズ

842.44 KB

Downloads

6,837

このファイルはウイルススキャンされており、ダウンロードしても問題ありません。

ファイル情報

購読者数
228
評価
4.65/5.0 — 素晴らしい!
Status
まだダウンロードしていません
今日のダウンロード
95

Timeline

  • バージョンを更新しました 2.0.6

  • バージョンを更新しました 2.0.5

  • バージョンを更新しました 2.0.4

  • バージョンを更新しました 2.0.3

  • バージョンを更新しました 2.0.2

  • バージョンを更新しました 2.0.1

  • Initial File Release

素晴らしい!
評価数: 23 レーティング
😢
0
悲しい
😠
0
怒った
😮
0
びっくり
🙏
25
ありがとう
😂
0
おもしろい
😍
16
大好き

パーミッション

アップロードの許可
いかなる場合でも、このファイルを他のサイトにアップロードすることはできません。

変更許可
私のファイルを修正したり改良したりする場合は、まず私の許可を得なければなりません。

転換許可
いかなる場合でも、このファイルを変換することはできません。

資産使用許可
私のファイルの資産を使用することを許可する前に、まず私から許可を得なければなりません。

© ClipperOS - All rights reserved. このファイルを作者の許可なく再アップロード、再配布することは禁じられています。 このMicrosoft Flight Simulator 2020用のMODを制作したのは ClipperOS and shared in Utilities » Applications のために Microsoft Flight Simulator.


112 コメント

User Reviews

4.65/5 - Based on 23 reviews

Review data

5 star reviews
70%
4 star reviews
22%
3 star reviews
9%
2 star reviews
0%
1 star reviews
0%

感想を共有する

このアドオンを使ったことがある方は、その感想を他のパイロットに伝えてください。

レビューを書く

When used, it interferes with GSX Pro and partially interferes with the ground worker's animation.

As far as we can tell, it cancels all animations until the ground worker with the bypass pin that spawns when pushback is requested reaches the nose gear.

AI vehicle code stops ground services, tug fuel truck ect wont be able to connect to the player. Had to turn it off.

Anyone uses AIGround and/or AIFlow with FShud ? Are there any conflicts ? Do they play nice with each other ?

Well done with both AIGround and AIFlow, your utilities seem to have sorted out all of the bunched-up aircraft, thus making all AI traffic more real when they are taxing, departing, and arriving. I haven't seen any recent GoArounds.

Hi, are there any updates planned for SU11?

Thank you for your great tool. I have installed AIground v2.04 and FSLTL 1.2.1 in MSFS SU11 WU11. Now I've two issues when running "AIground" and "fsltl-traffic-injector" in parallel, at various airports stock or 3rd party, like EGLL, EGCC, KBOS, CYYZ:

  • Aircraft stick to the runways on take-off, they run in the direction of the RWY to infinity
  • at EGLL at RWY09R aircraft cleared for take-off at "hold short node" seem to loose connection to the"nodes of the taxiway" and creep to south west across the water

The taxi behaviour works better than default - also after landing - according to the configuration settings of "AIground.ini".

I did that with default settings and a little tweaking in "AIground.ini" to accelerate movements during taxi (max. 22kts limitation on taxiways, 40kts on runways after landing).

My hope was to have faster AI-traffic movements on the ground, after landing and on taxiways, this works ok, but "take-off" with "FSLTL" running at the same time does not work.

When running "FSLTL" without "AIground" take-off" is no issue.

Is there a possibilty to check compatibility to "FSLTL"? Maybe there are side effects with "FSLTL", e.g. the removal of aircraft sticking at "runway nodes" for, e.g. >120seconds.

Do you have any blog or forum where one can follow your development and process for AIGround/AIFlow?

Would be really interesting to see what you are up to!

Hi there, thanks for fantastic addons. However, the AI aircraft did not take off, just slide on the grass besides the runway. How to fix this?

If you use addon linker you can add both airflowe (exefile) and air ground (exefile) to tools-options -additionals options, link exe file in there.

All looks good with the AI ground new hotfix ....landings are great now without changing the ini file , the only last thing which would make it superb is that when the aircraft are at stand thet rotate about 45 degrees after a short while , hopefully this can be fixed then it will be excellent , keep up the great work

image

mjleprix

3 month(s) ago / ありがとうございます。 ClipperOS

slight correction it did it with the first landig and arrival at gate but the next six were all ok. Well done and many thanks for your time spent to date.

great addon but even with latest update they still hit the gate at 45' and start to slowly spin round. But keep up the good work as it does the trick with everything else.

Although it is good that aircraft do not stop when transitioning from rollout to taxiing speed, I prefer the previous version where I could extend the rollout to just ahead of the taxiway turnoff before the plane slows to taxi speed using AILANDINGTARGETTIME.

Now when I set AILANDINGTARGETTIME to anything above 0 as soon as aircraft exit the runway they charge off like an enraged rhino across the airport running through buildings etc and heading off cross country to the horizon.

Good work on this.

My only two issues are that the aircraft come to a dramatic stop on rollout too soon and then continue, although with your ini fix they do depart the runway quicker which is great.

The other thing is which has been mentioned and I know you are looking into is that they taxi to stand a bit fast and start to spin at gate , if these issuess are fixed then it wil be perfect.

"To start AIGround automaƟcally when MSFS starts, add an entry for AIGround to the MSFS exe.xml file at:

AppData\Local\Packages\MicrosoŌ.FlightSimulator_8wekyb3d8bbwe\LocalCache\exe.xml"

The only xml file I see there is the SimConnect.xml. No exe.xml. Even if there were one I wouldn't know what to add. Can anyone enlighten me?

I just tried this mod and was excited to see two GA aircraft taxiing out to the active runway. Their speed seemed realistic, one following the other. Each stopped for half a moment before turning onto the runway - good - then each, in turn, taxied about 25 meters along the runway before actually starting their takeoff roll. Odd.

I didn't watch the first one carefully but noticed, when I looked for it, I couldn't see it climbing out. The next one I watched and it seemed to disappear after passing the end of the runway. I fly in VR with a Rift S so _maybe_ it just pixelated away at that point. I don't know.

This looks promising but, I have to say, landing at another similar sized airport - with parking spaces - I didn't see any taxiing happening. I fly every day so we'll see what happens today.

I've yet to land or take off from an airport with jet liners so I haven't witnessed AIFlow in action yet. Hoping for good things with it.

Liked. Will add stars after more testing.

thank you very much for these fabulous plugins AIGround and AIRFlow thank you very much for this. Can someone help me with two problems I'm having

1. In the airports where the planes never take off, with these tools they manage to reach the runway and do not stop, but they behave strangely. After 2 seconds the plane moves but does not turn on the white strobers and moves as if it were in a taxi. what am I doing wrong

2. How do I get both programs to start automatically when I start MSFS on STEAM?

hope someone help me

does this work with fsltl ai traffic??

"AIGround can also optionally increase or decrease the AI’s taxi speed."

does this mean aiGround decides when to increase taxi speed up to the max limit set in the .ini? or does it mean aircraft will always taxi with the set speed. or how is this supposed to work? because I dont seem to see any change in taxi speeds even when setting 40.0

thanks

The main thing I need with AI. When cleared for takeoff. Right now they take forever to takeoff. Hurry up line up and move! no longer than 30 seconds. Same for landing they need to get off the runway under 30 seconds, now they can just take a 5min stroll on the runway after landing causing countless go arounds. These two things alone would improve traffic flow.




Roadmap
これらの商品は現在リストに掲載されており、近日中に処理される予定です。
Backlog
提案、バグ、未来へのアイデア。

  • Version 2.0.6 January 27, 2023

    (1) fixed blank system tray icon.
    (2) fixed user inadvertently freezing output console causing program to freeze (this was fixed a while ago, but accidentally re-introduced into 2.0.5 ironically while working on thread improvements).
    (3) improved efficiency of simconnect calls.

  • Version 2.0.5 January 24, 2023

    (1) user aircraft-AI spacing enforcement (and traffic zapper) now apply to both AI aircraft and AI ground vehicles (default).
    (2) AIGround now remains active when user in air, but below 2000 ft AGL (default) to help when AI is PRECEDING the user’s aircraft on final approach (the AI can complete its rollout & vacates quickly under control of AIGround).
    (3) added option to disable fast AI turns off runway after landing (in cases where AI is overshooting taxiway while vacating).
    (4) fixed prop AI not vacating runway (disabled high speed exit for props for now due to nose wheel skid issue).
    (5) added system tray icon options.
    (6) .ini read after file changes saved (i.e., periodic read deprecated).
    (7) fixed AIPUSHBACKHOLDTIME=0 (i.e., disabled) causing AIGround crash.
    (8) fixed occasional output console freeze.
    (9) fixed occasional AIGround crashes and various code optimizations.

  • Version 2.0.4 November 10, 2022

    2.0.4:

    (1) added AI high speed runway taxi after the landing rollout (default 40 kts). Helps get the AI off the runway quickly after landing, see AITaxiSpeedOnRunwayAfterLanding in readme.;
    (2) changed default landing and takeoff rollout times to 5 and 14 seconds respectively (enabled) to better support the new fast runway taxi feature and to support faster AI runway operations generally at busier airports;
    (3) added auto-removal of AI that had has stopped taxiing for a specified period of time, see AIZapAutoTime in readme;
    (4) fixed AI vacating the runway too quickly while turning.

  • Version 2.0.3 November 05, 2022

    2.0.3: (1) fixed AI landing rollout sudden stop; (2) tweaked taxi algorithm to reduce occasional spinning at gate; (3) fixed frozen console (e.g., user scrolling through console) sometimes stalling program, increased console output efficiency and added succinct mode (verbose=0) eliminating AI status messages.

  • Version 2.0.2 November 02, 2022

    2.0.2: fixed thread issue that occasionally caused AIGround to crash by itself (AIGround would end, but NO sim CTD).

  • Version 2.0.1 November 01, 2022

    VERSION 2.0.1:  (1)  fixed issue with SimConnect erroneously causing sim to CTD when reading AIG AI text data and also added an AIG compatibility testing mode as backup if still experiencing issue; (2) fixed high CPU occupancy BEFORE connecting to sim; (3) added quick "push" after landing rollout to force AI to vacate runway quicker.

  • リリース October 26, 2022

    このファイルはリリースされたばかりです。是非お試しください!

よくある質問

ご質問ですか?答えはここにあります。


こちらはかなり空いています。

寄付金

これらのユーザーは、寄付を ClipperOS これからも、みんなが楽しめる素晴らしいアドオンを作り続けてください。

依存関係

These add-ons may be required or recommended to use.


こちらはかなり空いています。