First things first:
If any problems arise, please contact me before writing bad comments or giving one star ratings. ;)
>>>> Please send me your FSUIPC7.ini and FSUIPC7.log to nils[at]public-files.de after a flight you had problems with. <<<<
This is a FSUIPC7 Lua plugin, which dynamically plays the callouts you would hear from the pilot monitoring (PM) in an Airbus A320 series flight deck during takeoff and landing (including rejected takeoff, go-around and touch-and-go). It is to be used with the FENIX A320 series ONLY.
What it does:
- The plugin runs automatically upon loading the FENIX A320 add-on.
- Default mode (manual data antry): The takeoff V-Speeds need to be entered manually, at any time before departure. Keeping the PERF button of one of the MCDUs pressed brings up a small data entry window. Follow the instructions.
- Advanced mode: The takeoff V-speeds are read from variables, that are provided by a third party software called "FenixQuartz" created by user "Fragtality". With this, there is no need to enter the V-speeds manually, like in default mode. See https://github.com/Fragtality/FenixQuartz for download, info and limitations. If FenixQuartz is installed correctly and started with/prior to MSFS, PMCO will be in advanced mode automatically. There is no need to change anything in the PMCO plugin.
- If you plan to do a touch-and-go, bring up the window before landing, to enter rotation speed (Vapp in this case). This is needed in default and advanced mode!
- The following callouts are included:
- Takeoff: STABILIZED, FLEX SET / TOGA SET, AIRSPEED ALIVE, 100 KNOTS, VEE ONE, ROTATE, POSITIVE CLIMB, CLIMB SET
- Landing: SPOILERS, REVERSE GREEN, DECEL, 70 KNOTS, AUTOBRAKE OFF
- Gear confirmation: GEAR UP, GEAR DOWN
- Flaps confirmation: FLAPS UP, FLAPS 1, FLAPS 2, FLAPS 3, FLAPS FULL
- Special: STOP (rejected takeoff), STAND UP, GO (touch-and-go)
PMCO_FNX32X (Takeoff Demo) - YouTube
PMCO_FNX32X (Landing Demo) - YouTube
PMCO_FNX32X (Data Entry Demo) - YouTube
Important notes and prerequisites:
- Registered version of FSUIPC7 (for MSFS) is required! The free version is not sufficient, unfortunately!
- Please, follow carefully the included readme for installation instructions (PMCO and FSUIPC + WASM-module)!
On request, there is now also a video, guidung you through the installation: PMCO_FNX32X (Install Guide) - YouTube - If MSFS is run as admin, FSUIPC7 must also be run as admin. Either both or none!
Credits:
The default soundset was recorded by Nick Kidd. Big thanks to him!
This (my Lua plug-in) is free to use. However, if you like my work and wish to donate, it would be greatly appreciated: paypal.me/payNilsU
I wish you safe flights and happy landings!
4 hours ago
PlanePusher
7 hours ago
5 hours ago
dermobb
PlanePusher
4 days ago
4 days ago
dermobb
krzylisz
9 days ago
7 days ago
dermobb
nikita_567
13 days ago
13 days ago
dermobb
RyanZ225PC
15 days ago
15 days ago
dermobb
danns2001
17 days ago
13 days ago
dermobb
jjstevens1029
I hope you can make something out of it ..
17 days ago
17 days ago
dermobb
phbat
18 days ago
18 days ago
dermobb
J.PAULO
Just wanna tell u, that you still need the Fenix Quartz app for the exact readout of the v-speeds!
Otherwise, as you assuemd, PMCO is only reading out the fallback speeds!
19 days ago
19 days ago
dermobb
maxibk
20 days ago
20 days ago
dermobb
nikita_567
23 days ago
22 days ago
dermobb
rafapiloto195
Since your update i get the speed values read out automatically without the fenix quarzt tool, thats pretty cool!
The only thing is, that the V1, VR and V2 are not the acutal calculated, they are highly offset.
Do i still have to use the fenix quartz tool?
Entering manually everything works fine as usual!
23 days ago
22 days ago
dermobb
maxibk
24 days ago
23 days ago
dermobb
phbat
25 days ago
24 days ago
dermobb
fkarste